Tungsten alloy, tungsten heavy alloy, Tungsten alloys
L
Wolframlegierung, schwere Wolframlegierung, Wolfram-Legierungen
A Liga de tungsténio, ligas pesadas de tungstênio, ligas de tungstênio
Aleación de tungsteno, aleación de tungsteno pesado, aleaciones de tungsteno
 
Home>>Tungsten alloy  
Search
Tungsten alloy

Tungsten alloy

Tungsten Alloy, which contain elements such as nickel, copper and iron, produce a host of alloys which have engineering properties similar to steel, are relatively easy to machine, and can be plated or painted to enhance their corrosion protection. These alloys are approximately 50% denser than lead resulting in a higher concentration of mass in a limited area.
Usually, Tungsten alloy could be manufactured as the parts of military defense, extrusion die, some counterweights, such as yacht counterweights, vehicle counterweights, airplane counterweights, helicopter counterweights, boat counterweights, tank counterweights, etc.

Tungsten alloy material
<div>Tungsten heavy alloy generally are refractory metal, which have two-phase composites consisting of W-Ni-Fe or W-Ni-Cu or even W-Ni-Cu-Fe, some tungsten alloy is added Co, Mo, Cr, etc. It could be made as various shapes, such as rod, cube, block, brick, ring, etc.</div>
inquire
Tungsten alloy bar
1, Width×Length: (2.0-100.0mm)×(2.0-100.0mm)
2, High: 50-1000mm
3, Density: 15.8-18.75 g/cm3
4, W content: 85-99%
5, Composition: W-Ni-Fe, W-Ni-Cu
6, Surface: Sintering surface, Forged surface, Ground surface
inquire
Tungsten bucking bar
Bucking bar is a work tool received behind work surfaces to provide a backing member in applying impact fasteners and including intermitted tool head and handle parts with a low-recoil impact-absorbing spacer provided there between to take shock loads in compression and shear.
inquire
Tungsten alloy rod
1, Diameter: 2.0-100.0mm
2, Length: 50-1000mm
3, Density: 16.5-18.75 g/cm3
4, Composition: W content: 85-99%, W-Ni-Fe, W-Ni-Cu
5, Surface: Sintering surface, Forged surface, Ground surface
inquire
Tungsten alloy plate
1, width×Length: (2.0-250.0mm)×(2.0-250.0mm)
2, thickness: 2mm-15mm
3, Density: 15.8-18.75 g/cm3
4, Composition: W content: 85-99%, W-Ni-Fe, W-Ni-Cu
5, Surface: Sintering surface, Forged surface, Ground surface
inquire
Tungsten alloy sheet
1, width×Length: (2.0-500.0mm)×(2.0-500.0mm)
2, thickness: 0.2mm-5.0mm;
3, Density: 15.8-18.75 g/cm3
4, Composition: W content: 85-99%, W-Ni-Fe, W-Ni-Cu
5, Surface: Sintering surface, Forged surface, Ground surface
inquire
Tungsten alloy ball
1, Diameter: 1.0mm-100.0mm
2, Density: 15.8-18.75 g/cm3
3, Composition: W content: 85-99%, W-Ni-Fe, W-Ni-Cu
4, Surface: Sintering surface, Forged surface, Ground surface
inquire
Tungsten alloy cube
1, Density: 15.8-18.75 g/cm3
2, Composition: W content: 85-99%, W-Ni-Fe, W-Ni-Cu
3, Supply state: Sinter state, Grind state
4, Application: balance weight, Military industry
5, Advantage: High-density, High absorption capacity against X-rays and gamma rays, Good modulus of elasticity, High hardness.
inquire
Tungsten alloy ring
1, Diameter: 5.0mm-200.0mm
2, High: 2.0mm-50mm
3, Density: 15.8-18.75 g/cm3
4, Composition: W content: 85-99%, W-Ni-Fe, W-Ni-Cu
5, Surface: Sintering surface, Forged surface, Ground surface
inquire
Tungsten alloy tube
1, Diameter: 30-500mm
2, Thickness: 2-30mm
3, Length: 50-1000mm
4, Density: 15.8-18.75 g/cm3
5, Composition: W content: 85-99%, W-Ni-Fe, W-Ni-Cu
6, Application: Mainly used for high temperature furnace components, crucible, missile rockets nozzle high temperature furnace, etc.
inquire
Tungsten extrusion die
1. High thermal stability
2. High impact resistance
3. Good machinability
4. Excellent crack resistance
5. Reduction in press down-time
6. Minimal extruded metal pick-up
inquire
Tungsten alloy parts
1, Suitable for highly complex geometric shapes
2, Most parts require little or no secondary machining process
3, High level of surface finish as processed, of 32 rms or better
4, Tight tolerances of up to forms complex metal shapes without the need for machining.
inquire
Language: | český | danske | Nederlands | English | française | Deutsch | italiano | norske | português | român | русский | español | Švédsky | Türk
Address :  704 Tianhu Building, No. 150,Binglangxili, Siming District,Xiamen,China 361000
Email : sales@metalsexporter.com  MSN : maya@chtungsten.com  SKype : metalsexporter.com  
Copyright©2001 - 2011 Bango Alloy Technologies Co., Ltd. All Rights Reserved